Static Ground Monitoring Systems
static-ground-monitoring
While most competing systemsn only monitor the path from the ground unit to the clamp, the STS-300 also employs a segregated cable connection to actual ground, which is also monitored for low resistance. An interuption in either path (indicated by resistance aboue 5 ohm) will shut the system down.
The system can also be interlocked with filling equipment to ensure that no flammable product can be transferred until the ground is established. If the circuit is broken by release of the grounding clamp or other ground interruption, the contact relay will open and a red light will be displayed. Any filling equipment that is controlled by the system will also be halted until the ground is re-established.
The STS-300 system will do the following: shut down a pump or valve; sound an alarm; show a red light when conditions are unsafe; show a green light when conditions are safe; open contacts on a computer; indicate that static path to ground has integrity and receive permissive signals for a computer control. /Asset/STS 300 8x8.jpg
The alert mechanism is a red-blinking LED light that alerts the operator in the event that a loss of ground connection has occurred or has not taken place. The unit is well positioned in the market where portability, lack of electrical service and the monitoring of grounding and bonding static discharge is paramount.
The Static Sure LE600 is cUL Rated and Certified to Class I, Div 1, Group A,B,C, D and Class II, Div 1, Groups F,G.
Intrinsically Safe design.
Temperature Rated to T4.
Environmental Rated to IP65. /Asset/StaticSure_2_500x625.jpg

STS300 Ground Monitoring System
The STS300 Ground Verification System provides a positive ground indication through the use of an intrinsically safe monitoring circuit driving a switching relay. Upon connection of the self-releasing clamp and cable to a conducting material, the intrinsically safe circuit is completed and the operator will be shown a green light to indicate that a ground connection has been established.While most competing systemsn only monitor the path from the ground unit to the clamp, the STS-300 also employs a segregated cable connection to actual ground, which is also monitored for low resistance. An interuption in either path (indicated by resistance aboue 5 ohm) will shut the system down.
The system can also be interlocked with filling equipment to ensure that no flammable product can be transferred until the ground is established. If the circuit is broken by release of the grounding clamp or other ground interruption, the contact relay will open and a red light will be displayed. Any filling equipment that is controlled by the system will also be halted until the ground is re-established.
The STS-300 system will do the following: shut down a pump or valve; sound an alarm; show a red light when conditions are unsafe; show a green light when conditions are safe; open contacts on a computer; indicate that static path to ground has integrity and receive permissive signals for a computer control. /Asset/STS 300 8x8.jpg

Static Sure Portable Static Monitoring System
(6) The Static Sure LE600 is designed to operate in trucking, fuel transfer, chemical mixing and rail operations where grounding identification is both required and essential to a safe transfer of materials.The alert mechanism is a red-blinking LED light that alerts the operator in the event that a loss of ground connection has occurred or has not taken place. The unit is well positioned in the market where portability, lack of electrical service and the monitoring of grounding and bonding static discharge is paramount.
The Static Sure LE600 is cUL Rated and Certified to Class I, Div 1, Group A,B,C, D and Class II, Div 1, Groups F,G.
Intrinsically Safe design.
Temperature Rated to T4.
Environmental Rated to IP65. /Asset/StaticSure_2_500x625.jpg

Bond-Rite Self Testing Clamps
The revolutionary design of the various Bond-Rite products available offer enhanced safety and security by continuously testing the connection of the clamp to the container or other conductive equipment and provides a visual verification of this condition back to the operator. The Bond-Rite is generally used when only a visual indication of proper ground or bond is necessary. /Asset/Electric-Clip.jpg
Earth-Rite Plus and Earth-Rite RTR™ Static Ground Indicating & Interlock Systems
Operating off-of a main power supply, these systems confirm the connection and monitor the static ground path according to North American and International static control requirements and provide both a red & green LED light display as well as an internal voltage free switch contact to interlock with pumps, valves, alarms or other control devises. /Asset/ground_monitoring.jpg
Earth-Rite FIBC Ground Indicator
This system is specifically designed for Type C “super-sacks” or “big bags”. The system insures that the bag is within the correct design parameters with respect to conductivity and ground resistance before filling or discharging can take place. The system provides a red & green LED light display as well as an internal voltage free switch contact to a designated control devise. /Asset/a1055.jpg
Earth-Rite Multipoint Static Grounding and Bonding Monitor System
This system is designed to provide grounding and ground monitoring of multiple connection points simultaneously through one common monitoring panel. The system provides a red & green LED light display for each station being monitored as well as an internal voltage free switch contact to a designated control devise. /Asset/a1057.jpg
Mobile Bonding and Grounding Systems
There are situations where mobile vehicles must operate within, or close to, potentially explosive (flammable) atmospheres and where a static spark can have dangerous consequences. These applications can include vacuum trucks, emergency response/hazmat vehicles and refueling trucks. The Mobile Bonding and Grounding Systems reinforce existing safety protocols by providing and monitoring a proper ground/bond connection to safely dissipate the static charge to a high integrity ground. /Asset/a1058.jpg